The below information will take you through the updates that are specific to this application. For more general information and product update videos, please see the general New Release page. v.10.0.1.232 Released 14th October 2020 Added new checkbox option in the strips depth column dialog which can only be be used on civil sections that enables the application of a centre point for the civils header label. This change is to solve an issue where if the strip had more than two columns the label would always be shown offset and unable to aligh with the initial columns. v.10.0.1.229 Released 25th September 2020 Fixed a bug with follow on headers and footers where the first page header or footer would be the size of the follow on instead. v.10.0.1.225 Released 12th August 2020 Added enhancements for Dynamic Logs to show values from strips on first page, last page or first and last. Merge option added to Dynamic Log dialog for when data changes based on type. v.10.0.1.204 Released 02nd July 2020 Fixed an issue where it wasn't possible to made adjustments to the header and footer area mm sizing of logs/sections v.10.0.1.196 Released 12th June 2020 Fixed an issue where the save template button was still active after pressed, this meant users could double press it which would cause Studio to crash and the log corrupted. v.10.0.1.193 Released 10th June 2020 Improved error messaging on log preview. If a log fails to preview messaging will be displayed for the following conditions: Missing field validation and Image grid sizing out of bounds v.10.0.1.187 Released 28th May 2020 App stability updates Restyled the icons when the window is shrunk Release of OpenGround Cloud Released 25th April 2020 Release of OpenGround Cloud and related applications Fix for speed issues on Project and Template list loading All of the notes below are relating to Keynetix.cloud and related products. These are included here for historic purposes. v10.0.1.153 Released 30th March 2020 Added validation into the Dynamic Log dialog so that it will prevent preview if incorrect syntax is used in the expression dialog Fixed a bug where if you had a blank Template Type in the Dynamic Template dialog it would crash. Now it asks for a valid entry Fixed a bug where having small grids for a log follow on would previously show as medium Fixed a bug which stopped logs from previewing when a strip hide condition was used. v10.0.1.140 Released 26th February 2020 Improved first page/follow on template setup by adding greater precision to units per page. field is now decimalised. fixed a bug where scale wouldn't show the numbers under certain scale alignment settings v10.0.1.136 Released 11th February 2020 Added a new feature for Headers and Footers called, First Page and Follow On. The First Page Follow-on functionality allows for a different first page to be used compared to the rest of the log template. For example, this allows for a bigger header and footer area to be used on the first page of the log template, with a smaller area assigned to these on the following pages, allowing for more depth area to be shown. v10.0.1.124 Released 21st January 2020 Fixed a bug affecting editing of tables causing the application to terminate. v10.0.1.110 Released 13th December 2019 Fixed a bug with previewing site plans. See user guide for information on how to use the new functionality by clicking here . v10.0.1.108 Released 11th December 2019 This release contains addition of new template type called "Dynamic Templates" See user guide for information on how to use the new functionality by clicking here . v10.0.1.94 Released 29th November 2019 Updated App for change to API and enhanced Security v10.0.1.83 Released 11th July 2019 Fixed display of connector symbols being used for range symbols on logs where previously if the connector carried on to the next page it would not be displayed. (Tile Y Selection only) Fixed a bug with displaying the ground scale values correctly if the hole had any inclination values applied. v10.0.1.81 Released 20th May 2019 Fixed a bug with quicklogs/log reports displaying. The bug would prevent previewing of the template where there was a vertical scale added which had the flag set for display ground level scale and the locations ground level was greater than 0 but less than 1. Fixed a bug with combined logs displaying duplicate data for range text box items where the data is on the transition depth. v10.0.1.78 Released 16th April 2019 Fixed a bug with combined logs displaying duplicated and squashed data when a straight line is used as the log transitions to next type. Increased app security. v10.0.1.74 Release 02nd April 2019 Fixed an bug with overwriting templates with the same name under the following scenario: Borehole Log 1 saved as a standard Borehole Log Template. Borehole Log 2 saved as Borehole Log 1 but as a Master Template. The template will be overwritten but in Enterprise you will see two templates with the same name. (please note that this change does mean that any template type saved with the same name as a different type of template will overwrite the previous one. For example saving a log as Test Log and a Site Plan as Test Log will mean the original log will be overwritten to become a site plan with the name Test Log.) v10.0.1.72 Released 13th March 2019 Fixed an issue affecting the installer when used on Windows 7. App would not launch due to missing file in the installer package. v10.0.1.70 Released 11st March 2019 App is updated be compatible with updates to the Keynetix.Cloud API v10.0.1.65 Released 1st March 2019 Fixed an issue with saving changes to existing templates where the save dialog would hang. v10.0.1.63 Released 28th February 2019 Improved the loading times of the template list. Retrieval of all available templates is now quicker. v10.0.1.61 Released 28th January 2019 App is updated be compatible with updates to the Keynetix.Cloud API v10.0.1.59 Release 19th November 2018 App is updated to support the enhanced security changes to cloud infrastructure. v10.0.1.58 Released 1st October 2018 Added Master Template Support. Fixed a bug where the groups selection for creating filter groups wasnt displaying the names instead would be blank. Fixed a bug where if you added a office field as a data label text but didnt have an office linked to the project Studio would display a record from the Location Details group. The top bar will now show what cloud is currently being used.
↧
Wiki Page: Template Studio Release Notes
↧
Wiki Page: Civil 3D Extension Release Notes
The below information will take you through the updates that are specific to this application. For more general information and product update videos, please see the general New Release page v.10.0.1.296 Released 14th October 2020 Enabled the display of civil strip centre column for header lables which was added to the latest Studio released. . v.10.0.1.290 Released 2nd October 2020 Added a bility to display actual locations Eastings and Northings on Profile Strips v.10.0.1.271 Released 12th August 2020 App updated in line with latest updates to the Cloud API changes for Multi Grid Support v.10.0.1.259 Released 02nd July 2020 Fixed a bug where authentication would fail for login if the user had the desktop version of the Civil 3D Extension installed alongside OpenGround Cloud Civil 3D v.10.0.1.252 Released 28th May 2020 Fixed a bug where updates wouldn't complete in instances where strata were removed or updated (not always but in certain scenarios) Release of OpenGround Cloud Released 25th April 2020 Release of OpenGround Cloud and related applications All of the notes below are relating to Keynetix.cloud and related products. These are included here for historic purposes. v.10.0.1.220 Released 30th March 2020 Fixed a bug where dynamic scale for graphs on strips wouldn't show correctly based on data being presented. Fixed an issue with the audit history which would cause issues fetching updates. v.10.0.1.198 Released 27th February 2020 Updated app in line with changes to api and security v.10.0.1.190 Released 11th December 2019 Updated app in line with changes to api and security v.10.0.1.187 Released 29th November 2019 Added ability to display plain and slotted pipe references for installations. v.10.0.1.186 Released 20th November 2019 Fixed a bug where materials were not displayed in the hatch manager v.10.0.1.179 Released 11th November 2019 Removed the database ID flag which for some cloud users who had their on premise databases merged and migrated to the cloud would not be able to connect their drawing files to their projects. v.10.0.1.164 Released 19th September 2019 Added new USGS Hatch patterns which can be used in Enterprise when the following hbc is imported v.10.0.1.160 Released 16th August 2019 Fixed a bug where profiles would crash on rebuild in certain circumstances due to invalid extends v.10.0.1.152 Released 14rd May 2019 Fixed a bug with displaying strip headers for plan and profile view. When data isnt present in one of the headers that header label would overlay on top of the header next to it which contain data. Fix will hide strip headers where no data is present in them. Improved error handling for fences when they crash on rebuild. Fixed a bug where the can manage geotechnical layers role wasnt working correctly v.10.0.1.144 Released 30th April 2019 Fixed a bug with CAD crashing on profile rebuilding under certain circumstances. v.10.0.1.143 Released 23rd April 2019 Fixed an issue where CAD would crash on using the Geology Interpretation "follow" command in specific situations. v.10.0.1.135 Released 16th April 2019 New Functionality added: Persistence of Interpreted data is now possible (BETA) Added Load and Save buttons. Load- will allow users to create a Ground Model interpretation after edits as well as loading existing edits in a new drawing. Save-will let users save what has been edited to an existing ground model interpretation or save a brand new one. Added Follow and Trim functions. Follow will copy the selected strata and use its interpretation for a different profile line by selecting a starting point and using the mouse to choose which side of the line to trim.. Trim is use for quick undo of a part of a selected profile line Can also save non geotechnical profiles which can be restored to a new drawing. They are called supplementary profiles and can be found in the save menu. Bug Fixes: Improved handling of fences which have been modelled. Prevention of application hanging in situations where fences have been modelled. Improved error reporting by showing when fences fail to generate. Improved app security. v.10.0.1.134 Released 11th April 2019 Fixed an issue where in certain circumstances CAD would crash when rebuilding profiles. Issue found in 2019 Civils. v.10.0.1.127 Released 29th March 2019 Fixed a bug with displaying section strips where inclination was set as 0 in Enterprise. The plan view would show the inclination correctly but the section would flip it. v.10.0.1.120 Released 11th March 2019 Fixed a bug where if data was added to the Orientation and Inclination table with empty record for Inclination Civils would treat it as 0 degrees. It is now treated as 90 degrees. v.10.0.1.115 Released 13th February 2019 Fixed a bug where manually removing a borehole from a profile would remove all of them if the profile alignment was curved. v.10.0.1.113 Released 11th February 2019 Enhanced geology modelling performance on the cloud. v.10.0.1.109 Released 06th February 2019 Fixed a bug where profiles would crash if created using "other surfaces" v.10.0.1.104 Released 28th January 2019 Added the option to create project level hatches and styles. Hatches can be copied to the project edited and saved so they will be only used for that project, same with styles. New Styles and Hatches can be created to be used within the project created in and not shared across all projects that share the same Configuration Pack.. Project level styles and Hatches can be copied to the Configuration pack Fixed a bug where the Hatch Manager would show duplicate hatches if the same picklist name was used for a different geology type. An example of this is CL used for Geology Code and cl used for Geology Code 2. CL would appear twice in the hatch manager but it is the same picklist so deleting one would remove both. v.10.0.1.89 Released 19th November 2018 App is updated to support the enhanced security changes to cloud infrastructure. v.10.0.1.88 Released 07th November 2018 Fixed a bug with rebuilding profiles which contain duplicate hatch names in use for separate geology references (e.g Legend Code or USCS) Fixed an issue with hatches being displayed inconsistently in front or behind when dual graphics library items are used for the strips. (REGEN command needed after changes in 2017) v.10.0.1.83 Released 01st October 2018 Fixed a bug where updating changes to the drawing made from HoleBASE Enterprise edits wouldnt be picked up immediately due to difference in time stamp from change made on the machine to the cloud server which could be in a different time zone. v.10.0.1.80 Released 13th September 2018 Fixed a persistent CAD crash issue when connecting to a Project in Civils. Civils 2017 was affected by this crash. 2018 and 2019 were unaffected. v10.0.1.67 Released July 2018 Improvements made to the opening speed of the ribbon buttons. Added the Geology modelling interpretation to Cloud Civils
↧
↧
Forum Post: FILE ALREADY EXISTS ERROR IN GINT
hi I have the latest Gint logs software on 6 PCs and latest Bentley connection software. one of them works Ok then for no reason an error appears when i try to access Gint Fatal error The file already exists the work around is to uninstall all bentley software from the pc and reinstall. works fine again then a week later same error ANy help would be appreciated. Jeremy
↧
Forum Post: Error when trying to preview an output graph.
Any help with this error? When trying to preview an output graph, receiving the following error message: Object variable or With block variable not set MainCmd.CmdControl MainCmd.CmdExecute CmdID:178 'Preview Output' MainCmd.AppChangeExecute ChildForm.ChildFormInit gINT
↧
Forum Post: RE: Error when trying to preview an output graph.
Hi Matt, Send me a private e-mail with your info and I'll give you a call to troubleshoot kirk.johnson@bentley.com
↧
↧
Wiki Page: Default Locations Styling/Theming
You are able to style various aspects of how the Locations appear on the background map. The areas of customisation are: Size of Location symbol- Ability to change size based on zoom level Add/change Labels and style also based on zoom level Adding/changing tooltips for the Locations. The Locations Styling are styled within the Configuration Pack and not per project, so it is important to note that the styles will carry across all the projects within that Configuration Pack. Select Default Locations from the Configuration Tools menu, by default there will be pre-configured location styles available. These styles can be modified or deleted and new ones created if required. From the above image you can see that Location symbols have been defined and zoom levels set per size. These can be amended by selecting an area you wish to adjust and applying the changes. If you want to remove a layer, select the layer a press Remove. You can also copy a selected layer by highlighting the one you want to copy and selecting the Copy button. The example below shows that the symbol size will increase when the zoom level changes from 2-3 and again from level 4.
↧
Wiki Page: KeyAGS Checker and Editor not opening
If a PC has a 32 bit version of Office installed, there may be an issue with opening KeyAGS Checker and Editor Please note a full admin login is required to complete these actions 1. Open the registry. Under the Start button, type in Regedit, and select from the list 2. Go to the key, HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Keynetix\KeyAGS4 3. Export the key from the registry including it's sub keys and save it 4. Right click the exported file and select "Edit" 5. Remove any reference of "WOW6432Node" from all the paths in the file 6. Save the changes 7. Double click the file to import it back into the registry Test the Checker and Editor to make sure they both open
↧
Wiki Page: How to import AGS mappings
To start with got the sheets. In the middle there is AGS mapper, in this interface, there is an import-export button. You will need to select the Override and hit the import button. You will need to select the CSV files for each. You don’t need to select the version of AGS it will just know the version it will match.
↧
Wiki Page: Cannot locate library message on opening gINT - August 2020
If you have recently started receiving a message that says cannot locate library and you then browse to the library and are unable to click on it this is most likely due to a Microsoft Update from early August 2020. This Microsoft update causes an issue with the Microsoft Access Database engine 32-bit that gINT requires. Two Options to Reinstall the Access Database engine 32-bit 1.Goto control panel programs. Find the Microsoft Access database engine… Select it and run repair 2. Let gINT Reinstall the Access Database engine 32-bit First make sure there are not any gINT processes running in task manager. If so end them. Then uninstall gINT and also uninstall the access 2010 redistrib 32 bit from control panel. If you have 2 redistributables , the smaller one is usually the 32 bit one. You will probably need to reboot. After reboot reinstall gINT. It should prompt the install of the prerequisite Access 2010 redistrib 32 bit…. let the program reinstall it. Then you may be prompted to reboot again after install. Then reopen gINT. Below shows the Access Database engine in control Panel
↧
↧
Wiki Page: Cannot Open a Database Created With a Previous Version of Your Application - August 2020
If you have recently started receiving a message that says Cannot Open a Database Created With a Previous Version of Your Application this is most likely due to a Microsoft Update from early August 2020. It may look something like this. This Microsoft update causes an issue with the Microsoft Access Database engine 32-bit that gINT requires. If you have recently started receiving a message that says cannot locate library and you then browse to the library and are unable to click on it this is most likely due to a Microsoft Update from early August 2020. This Microsoft update causes an issue with the Microsoft Access Database engine 32-bit that gINT requires. T wo Options to Reinstall the Access Database engine 32-bit 1.Goto control panel programs. Find the Microsoft Access database engine… Select it and run repair 2. Let gINT Reinstall the Access Database engine 32-bit First make sure there are not any gINT processes running in task manager. If so end them. Then uninstall gINT and also uninstall the access 2010 redistrib 32 bit from control panel. If you have 2 redistributables , the smaller one is usually the 32 bit one. You will probably need to reboot. After reboot reinstall gINT. It should prompt the install of the prerequisite Access 2010 redistrib 32 bit…. let the program reinstall it. Then you may be prompted to reboot again after install. Then reopen gINT. Below shows the Access Database engine in control Panel
↧
Forum Post: REFERENCES TO CURRENT FIELD - 0 Reference found to
In the column 'Moisture' no data output, I found the error from REFERENCE TO CURRENT FIELD '0 references found to >. How to reference it?
↧
Forum Post: RE: REFERENCES TO CURRENT FIELD - 0 Reference found to
Hi Miranda, The screen you are showing is a field property that sees if that field is referenced in any of the reports in the current library you have open. It could be that you have another library file that has reports that reference that field. In that case goto file ..change library and open a different library file. If you want that information to show up on a report you will need to write an expression to call it into a column. There are a wide variety of ways that can be done and a wide variety of entities, report types that this is done. Below is the report design tutorial that describes how to create a column and write expressions (call in tables and fields into reports) If you need more specific information based on your custom database and reports please create a service request online and add your custom gINT files (library and Project) to the service ticket. https://apps.bentley.com/srmanager/ProductSupport
↧
Forum Post: gINT Administrator form modification
I watched the form modification video that Katie made, but it only handled some basic stuff. I've only just begun to mess with it, so I'm still in the clunky phase. First off, I really like this layout on this part of the form I've messed with. The only problem.... I don't know how I did it. There are definitely fields which don't need to be very wide, so something similar would be a good look for many things, to avoid wasting space. Second, is there a way to place a dividing line? The boxes run together. I'd like to place blocks around certain groups of a line all the way across to divide parts of the form. Next, Is there a way to connect the tablet to the system without wifi? Our office doesn't have wifi, so I can't experiment with the tablet without taking it home or some other location. Can I tether it into our wired network? Lastly, is there a way to make a combo list? I'd like to use a radio button for something like Limestone, Shale, Sandstone, and Other. Then, next to Other, there's a pulldown for another list of options.
↧
↧
Wiki Page: KeyAGS Free Version
Installer Downloads 32bit Download 64bit Download To find out what version of KeyAGS you need to install, please click here . NOTE : Chrome users who receive the following message may need to click on the up arrow and select the required option to download the file. Whats Included? The following features are included in the KeyAGS Free Version. AGS Checker Support for AGS3, AGS 3.1 and AGS 4 Checking of single file submissions Checking of multiple file submissions Exporting error log Viewing data using the AGS data tree Viewing Data Statistics Editing AGS data in grid format Comparing two AGS files AGS Excel Importer Support for AGS3, AGS 3.1 and AGS 4 Importing AGS data into Excel 2003 and 2007 and 2010 and laer. Filtering imports by Hole ID AGS Excel Exporter Support for AGS3, AGS 3.1 and AGS 4 Setting up spreadsheet for AGS conversion Exporting AGS data from single Excel worksheet (restricted to 10 rows) View Full Comparison of KeyAGS Free Version and KeyAGS Professional Version
↧
Forum Post: RE: gINT Administrator form modification
Hi Jeff, It might be easier to discuss the different points in a call. Feel free to reach out to me directly at Marie-Claude.Dube@Bentley.com I tried to recreate a similar layout (like the in the screen shot you provided) but I can't. Currently, there's no way to place a divided line. Being able to group components in different sections of the form is a request in our backlog. You can use the Preview tool in gINT Administrator to see how the form will display on the tablet. To test the form, you need a connection on your tablet to access those forms. There's no direct way to transfer the forms from your computer to the tablet. For the last item, currently, it is not possible to split a list of values for a specific property in different component types. If I understand, you would like to see your top 5 items displayed with radio button and the remaining items would be in a drop down component, is that correct? Again, feel free to contact me directly if you need more details. Thanks, Marie-Claude
↧
Forum Post: Using Output Override X on a Fence Diagram
I have set up my fence template with the Geological Description on the right side of the stick, and the user has the option of including the USCS code on the right side also. I want to set it up so that if the USCS code is added, the Geological description moves over to accommodate it. I tried using "Output Override X" with the expression > = "R", 0.25)>>, but instead of moving over a quarter inch, it ends up off the page. How would I do this?
↧
Forum Post: RE: Using Output Override X on a Fence Diagram
Hi Terry, Try using the @ symbol in front of your offset @0.25 Or depending on the type @ ,2.5)>>
↧
↧
Forum Post: Changing font size for Sample ID to fit in the sample column
Hi, My sample ID's are quite long, they extend the width of the column as shown in the picture: Does anyone know hoe to reduce the font size just for the sample ID? Or will the font change for all words that are in Arial font? Thanks
↧
Forum Post: RE: Changing font size for Sample ID to fit in the sample column
Hi Zachary, If you can edit the template in Template Studio you will find an option for "Shrink to Fit". This will make the text size reduce to fit the column. Thanks Martyn
↧
Forum Post: RE: Using Output Override X on a Fence Diagram
Yes, that worked - thank you Kirk!
↧